A water based ink for PVC, styrenes and polycarbonate.

2700 series screen ink is a water-based ink that produces a glossy ink film, offers good weather resistance and is flexible enough for vacuum forming.

Substrates: Pressure-sensitive vinyl, top-coated polyester, static-cling, polycarbonate, some coated metals and styrene.

TECHNICAL INFO 2700 PVC SERIES

2700 Series Screen Ink is a water-based ink that produces a glossy ink film, offers good weather resistance and is flexible enough for vacuum forming.

SUBSTRATES

Self-adhesive vinyl, top-coated polyester, static-cling, polycarbonate, some coated metals and styrene.

MESH

70-120 Polyester mesh for most applications.

STENCIL

Folex DC106 or Autotype 6000 emulsion stencil systems are recommened.

SQUEEGEE

SG950 70/75 Green DURA Squeegee blade.

COVERAGE

185 – 278 square meters per gallon (3.8kg )depending upon ink deposit + mesh

PRINTING

2700 Series ink may be thinned to achieve proper ink flow. Thoroughly mix the ink prior to printing.

DRYING

2700 Series ink dries by evaporation in 20-30 minutes depending on temperature and humidity. Jet dry at 150 – 170 F (66 – 77 C) for approximately 30-45 seconds using maximum air flow through the oven. Adequate cooling may be necessary to avoid blocking problems when stacked.

CLEARS / VARNISHES:

Overprint Clear: Use 2727 Overprint Clear to reduce the density of colors or as an overprint clear. If foaming or flow issues are experienced during printing, add additional thinner until required flow-out is achieved.

PLEASE ASK FOR DETAILS OF THE FULL TECHNICAL AND MSDS DATA.