THE kpx 2000T SEMI AUTOMATIC WITH “TAKE OFF” OPTION (B2)
- High tech pneumatic squeegee system
- Mechanical frame raise & lower
- Adjustable vacuum printing base for off contact
- Auto screen “peel off”
- Diagonal squeegee setting
- Foot pedal start with pre vacuum
- PLC controlled with memory
- Side gripper “take off” (option)
Electrics: 380/415v, 3 phase, 50/60 Hz, 10 amps
Pnuematics: 1 cfm @ 100 psi (30 litres/min. @ 7 bar)
TAKE OFF UNIT (B3)
- Variable speed conveyor
- Variable speed grippers
- Adjustable gripper pressure
- Gripper pick up width 1⁄4” (7mm)
- Maximum substrate thickness 3⁄8” (10mm)
- Straight or 90º turn onto dryer
THE kpx 3⁄4 AUTOMATIC WITH ULTRA VIOLET DRYER (B4)
- Printer
- Auto take off
- UV bridge dryer (1 lamp or 2 lamps)
- Stacker or collection tray
Electrics: 380/415v, 3 phase, 50/60 Hz
Pneumatics: 1 cfm @ 100 psi (30 litres/min. @ 7 bar)
THE kpx RIGID MATERIAL 3⁄4 AUTOMATIC (GLASS, METAL, WOOD, RIGID PLASTIC, FOAM) (C2)
- High tech pneumatic squeegee system
- Mechanical raise and lower
- Adjustable vacuum printing base for substrate thickness change
- Automatic take off system from rising belts
- Automatic register system (option)
Electrics: 380/415v, 3 phase, 50/60 Hz
Pneumatics: 5 cfm @ 100 psi, (150 litres/min. @ 7 bar)
THE kpx 3D SEMI AUTOMATIC (A2/2)
- Able to print all sizes of flat objects up to 17” (430mm) deep
- (70mm) adjustable screen frame height can be manual or automatically adjusted (Machine characteristics & options as the KPX 2000T Semi Automatic B2)
Electrics: 380/415v, 3 phase, 50/60 Hz, 10 amps
Pneumatics: 1 cfm @ 100 psi (30 litres/min. @ 7 bar)
THE kpx BENCH UNIT SEMI AUTOMATIC (D2)
- Electro pneumatic controls
- Manual frame pull down with pneumatic clamping
- Variable speed printing & coating
- Variable printing & coating travel length
- Pneumatic print pressure
- Component thickness 0 – 5” (0 – 127mm)
- PLC operated
- Auto frame lower can be fitted (option)
Electrics: 220/240v, Mono phase, 50/60 Hz, 8 amps
Pneumatics: 3 cfm @ 100 psi (90 litres/min. @ 7 bar)
THE kpx STANDARD HAND TABLE (A4)
- Supplied with or without one arm squeegee
- Rigid construction
- Precision bearings on pivot and carriage
- Fine pitch x – y registration on printing base
- Strong silent vacuum unit with auto on/off or foot controlled vacuum if required
- Off contact by hand wheel (option)
Electrics: 220/240v, Mono phase, 50/60 Hz, 8 amps
THE kpx 3D HAND TABLE (A5)
- Supplied with or without one arm squeegee
- Rigid construction
- To print components 0 – 20” deep (0 – 50cm)
- Printing bases can have vacuum or be manufactured to suit components
- •The screen frame is raised and lowered by a hand wheel
- •Printing base can be with or without x – y fine pitch registration
Electrics: 220/240v, Mono phase, 50/60 Hz, 8 amps
THE kpx HAND TABLE WITH CONSTANT PRINT PRESSURE CONTOL (A6)
- Supplied with one arm squeegee
- Rigid construction
- Constant print pressure control
- Precision bearings on pivot & carriage
- Fine pitch x – y registration on printing base
- Strong silent vacuum unit with auto on/off or foot controlled vacuum if required
- Off contact by hand wheel (option)
Electrics: 220/240v, Mono phase, 50/60 Hz, 8 amps
THE kpx PARAPRINT 1⁄4 AUTOMATIC (A7)
- Horizontal screen frame at all times
- Pneumatic or manual screen frame raise & lower
- Clearance on both sides for overhang
- Supplied with one arm squeegee
- Fine pitch x – y registration on printing base
- Strong silent vacuum unit with auto on/off
- Constant print pressure control (option)
- Screen “peel off” (option)
- Assisted pneumatic squeegee drive
- Off contact by hand wheel (option)
Electrics: 220/240v, Mono phase, 50/60 Hz, 8 amps
Pneumatics: Frame lift: 3 cfm @ 100 psi (90 litres/min. @ 7 bar)
Squeegee drive: 6 cfm @ 100 psi (168 litres/min. @ 7 bar)
THE kpx MANUAL PRECISION SCREEN PRINTING MACHINE (A8)
- Illuminated vacuum printing base with anti-backlash x – y registration
- Variable size of screens are acceptable
- One arm squeegee (option)
- One arm squeegee with constant print pressure (option)
- Micro dial gauges (option)
Electrics: 220/240v, Mono phase, 50/60 Hz, 8 amps
THE kpx ECONOBASE (A9)
- Ideal for beginners or for samples
- Supplied with or without one arm squeegee
- Vacuum printing with auto on/off
Electrics: 220/240v, Mono phase, 50/60 Hz, 5 amps
THE kpx STANDARD HINGE UNIT TYPE 2 (A10)
- Supplied with or without one arm squeegee
- Can be converted to a full standard hand table
THE kpx PRECISION HINGE TYPE 3 (A11)
This unit is screwed to an existing work bench
- No counter balance needed (spring loaded)
- Fine pitch x – y registration
- Snap height adjustment
THE kpx SCHOOLS BENCH UNIT TYPE 1 (A12)
- Without one arm squeegee
- With or without a strong silent vacuum unit with foot control
- With or without x – y fine pitch screen registration
Overall Size: 45” x 45” (114cm x 114cm)
Electrics: 220/240v, Mono phase, 50/60 Hz, 8 amps (for vacuum models)
THE kpx LOW COST MANUAL COMPONENT PRINTER (B12)
Manufactured to suit customers’ individual components
- Fixed screen size
- Screen to component register
- Jigs to suit component
- Off contact adjustment
THE kpx T-SHIRT PRINTER (A13)
- Independent rotating plattens & screen frames
- Fine pitch x – y registration on screen frame holder
- Simultaneous “off contact” by a central hand wheel
- All screen frames can be lowered for simultaneous printing
- Sleeve plattens (option)
- Jacket hold down unit (option)
THE kpx BENCH UNIT CAP / T-SHIRT PRINTER (B13)
- Suitable for caps and tee shirts
- 1, 2 or 4 colour models
- Manual or pneumatic cap stretching (option)
- Excellent repeatability
THE kpx INFRA RED CONVEYORISED DRYER / CURING SYSTEM (C13)
- Thermostatically controlled infra red
- Variable speed PTFE coated fibre glass conveyor
- Hot air circulation is incorporated allowing both water based and plastisol inks to be used
- Cooling section on outlet
- Insulated panels ensure minimum loss of energy
- Adjustable entry and exit shutters to allow deeper objects to be cured
- Bottom open explosion area
THE kpx LONG WAVE INFRA RED SPOT CURER (D13)
- Variable heat control
- Warm air circulation
- Adjustable element height
- Air cooled electrics
- Platten sensor / audible pre set timer (type SP1 / 1 – SP2 / 1 only)
- Portable
THE kpx UMBRELLA INFRA RED DRYERS (VERTICAL-HORIZONTAL) (E13)
- Space saving
- Allows maximum print output
- Variable heat control
- Heat with air movement
- All sizes up to golf models
Electrics: 220/240v, Mono phase, 50/60 Hz, 32 amps
THE kpx TEXTILE TABLE (A14)
- Manufactured in any size up to 12m x 1.5m table size
- High quality linen backed neoprene top skin covering a felt underlay
- Rigid angle iron framework with suitable print table support to ensure flatness
- Rear register rails for print repeat stops
- Register rail brackets to allow the screen frames to be registered to the previous colour & to give repeatability
- Heated under blankets can be fitted as an option to aid drying time (up to 40°c)
Electrics: 220/240v, Mono phase, 50/60 Hz (if heated blanket is fitted)
THE kpx MANUAL AND SEMI-AUTOMATIC UMBRELLA PRINTER (B14)
- Fast setup
- Easy to use (pedal opening)
- Excellent registration
Electrics: 220/240v, Mono phase, 50/60 Hz, 5 amps
Pneumatics: 3 cfm @ 100 psi (90 litres/min. @ 7 bar)
THE kpx SCREEN DRYING CABINET (A16)
This unit can be used to dry coated screens or degreased screens
- 5 Drawer economy saving
- Thermostatically controlled heaters with continuously running fan
- Rear mounted air circulation fans
- Illuminated work surface (option)
- Each drawer is fitted with two sliding frame support bars
- Central dividing sliding T bars (option)
Electrics: 220/240v, Mono phase, 50/60 Hz
Models – 2721, 5141, 4848 – 15 amps
Models – 5850, 6146, 7058, 8970 – 30 amps
Height of illuminated models: 47” (119cm)
Height of non illuminated models: 40” (101cm)
THE kpx VERTICAL DRYING CABINET (A16-V)
- Manufactured for 10 screens
- Accepts different sizes of screens
- Slide in entry
- Temperature controlled
- High volume air circulation system
- Any size of configuration possible (option)
- Water drain off
Electrics: 220/240v, mono phase, 50/60 Hz
THE kpx DRYING RACK (B16)
- Round steel trays
- 50 trays
- Mounted on castors
THE kpx PHOTO STENCIL PRINTING DOWN FRAME (A18)
- Highly flexible vacuum blanket suitable for direct and indirect stencil systems
- Ultra fast vacuum exhaust system using all four sides of the blanket frame
- High vacuum pressure unit available (option)
- 180° rotation for overhead light source and glass cleaning
- Stencil safe light (option)
Electrics: 220/240v, Mono phase, 50/60 Hz, 6 amps
THE kpx METAL HALIDE LIGHT SOURCE (A19)
- Floor or overhead models available
- Rapid restart
- Electrically controlled cooling section
- Easy height adjustment
- Pre set timer or integrator (option) controlled exposure
- Toughened safety glass
THE kpx LIGHT INTEGRATOR (B19)
- Single channel digital integrator. Reading light units emitted from a light source, compensating automatically for tube deterioration digital light integrator
- Resetting facility
- Start / cancel buttons
- Fused system
Electrics: 220/240v, 50/60 Hz, 2 amps
THE kpx ‘PRINTASCREEN’ TOTALLY ENCLOSED EXPOSURE SYSTEM (A20)
- Metal halide light sources, 2 Kw, 3/5 Kw, 4/6 Kw available
- Exposure by self compensating digital light integrator
- High vacuum pressure units available (option)
- Glass cooling fans
- Stencil safe lights & retouching lights
- Highly flexible vacuum blanket suitable for direct & indirect stencil systems
- Ultra fast vacuum exhaust system using all four sides of the blanket frame
THE kpx SCREEN STRETCHING SYSTEM (A21)
Model 25
- 7 3⁄4” (196mm) wide fixed jaws on individual pneumatic clamps giving a maximum stretching force of 25 Newton/cm
Model 50
- 8” (203mm) wide pivoting jaws on individual pneumatic clamps giving a maximum stretching force of 50 Newton/cm
- Ultra quick mesh clamping system
- Supplied kit form or full systems built on work surface
- Warp & weft system (option)
- Auto clamp return system (option)
Pneumatics: 3 cfm @ 100 psi (90 litres/min. @ 7 bar)
THE thieme-kpx SQUEEGEE CUTTER (A22)
- Rotary cutter without heat
- Clamping of squeegee blade ensuring no distortion
- Angular cutting (option)
Electrics: 380/415v, 3 phase, 50/60 Hz, 1kW
Pneumatics: 1 cfm @ 100 psi (28 litres/min. @ 7 bar)
THE kpx SOLVENT SCREEN CLEANING UNIT (A23)
- Zinc galvanised mild steel booth with adjustable perforated shelf
- 6 gallon (30 litre) solvent tank with weir filter, integral pump, hoses and brush head assembly
- Solvent extraction system (option)
- Flameproof pump (option)
Electrics: 220/240v, Mono phase, 50/60 Hz, 6 amps
Height is increased by 30” (76cm) if extraction is fitted
THE kpx STENCIL REMOVAL BOOTH (A24)
- Zinc galvanised mild steel booth with adjustable perforated shelf
- Right hand side water drain outlet as standard
THE kpx HIGH PRESSURE SCREEN CLEANING UNIT (A25)
- Unit gives 1000 psi (70 bar max. using 2.4 gallons (11 litres of water per minute)
- Complete with adjustable lance
- Portable
- 1500 psi (150 bar) model also available
Overall Dims: 24” x 18” x 30” (60cm x 45cm x 76cm)
Electrics: 220/240v, Mono phase, 50/60 Hz, 5 amps
THE kpx STENCIL DEVELOPING UNIT (A26)
- Supplied in zinc galvanised mild steel with an illuminated polypropylene diffused rear panel
- Perforated adjustable screen frame support shelf
- Adjustable water spray and hose
- Electric heater unit with temperature gauge (option)
- In line water pump for low water pressure (option)
- Thermostatically controlled mixer unit with temperature gauge (option)
Models – 1-P, 2-P, 3-P can be made totally in polypropylene
Electrics: 220/240v, Mono phase, 50/60 Hz, 2 amps
THE kpx VERTICAL LIGHT BOX (B26)
- Diffused low UV outlet light
- Adjustable height screen frame support bar
- Cooling fans in top surface
- Easy access for tube changing
- Toughened glass
Electrics: 220/240v, Mono phase, 50/60 Hz
Recent Comments