Plastisol Inks
COLORADO ECO WHITE AD-TEX10
Plastisol ink suitable to print on t-shirt, sweater, etc. Suitable for background.
GENERAL CHARACTERISTICS
- Highly opaque
- Good printability
- Fast drying with IR lamps
- High washing resistance at 60°C
PREPARATION
Ready to use. Check the viscosity according to the job.
PRINTING
To obtain best results use screens 34-90 threads/cm both for manual printing and automatic.
POLIMERIZATION
Using flash-dryers the printing process will be easier. We recommend to regulate the time of the flash according to the power of the flash cure unit , the distance, printing type and thickness of the surface.
To obtain washing resistance put in the oven at 160°C for 2-3 minutes.
ADDITIVES
PLAST ADDITIVO UP, to obtain puff effect (add 20% max)
PLAST ADDITIVO 86, to reduce viscosity, to increase brightness (add 5% max)
PLAST ADDENSANTE 740, to increase viscosity (add 0,1% 4 hours before the use)
PLAST ADDITIVO 378, to improve printability (add 2% max)
PLAST ADDITIVO 24, to reduce viscosity and improve the printability (add max 1-2% max)
CLEANING
Wash tools with white spirit.
PACKING
7– 25 KG.
NOTE
Before to use the ink in production, we suggest to make some test in order to evaluate if the product satisfies the requirement.
ASPEN WHITE AD-TEX11
Plastisol ink suitable to print on t-shirt, sweater, etc. Suitable for background.
GENERAL CHARACTERISTICS
- Highly opaque
- Good printability
- Fast drying with IR lamps
- High washing resistance at 60°C
PREPARATION
Ready to use. Check the viscosity according to the job.
PRINTING
To obtain best results use screens 34-90 threads/cm both for manual printing and automatic.
POLIMERIZATION
Using flash-dryers the printing process will be easier. We recommend to regulate the time of the flash according to the power of the flash cure unit , the distance, printing type and thickness of the surface.
To obtain washing resistance put in the oven at 160°C for 2-3 minutes.
ADDITIVES
PLAST ADDITIVO UP, to obtain puff effect (add 20% max)
PLAST ADDITIVO 86, to reduce viscosity, to increase brightness (add 5% max)
PLAST ADDENSANTE 740, to increase viscosity (add 0,1% 4 hours before the use)
PLAST ADDITIVO 378, to improve printability (add 2% max)
PLAST ADDITIVO 24, to reduce viscosity and improve the printability (add max 1-2% max)
CLEANING
Wash tools with white spirit.
PACKING
7– 25 KG.
NOTE
Before to use the ink in production, we suggest to make some test in order to evaluate if the product satisfies the requirement.
AD-TEX12 CHAMONIX LB
Plastisol ink suitable to print on t-shirt, sweater, etc. High opacity.
GENERAL CHARACTERISTICS
- Highly opaque
- Good printability
- High washing resistance at 60°C
PREPARATION
Ready to use. Check the viscosity according to the job.
PRINTING
To obtain best results use screens 34-120 threads/cm both for manual printing and automatic.
POLIMERIZATION
Using flash-dryers the printing process will be easier. We recommend to regulate the time of the flash according to the power of the flash cure unit , the distance, printing type and thickness of the surface.
To obtain washing resistance put in the oven at 160°C for 2-3 minutes.
ADDITIVES
PLAST ADDITIVO UP, to obtain puff effect (add 20% max)
PLAST ADDITIVO 86, thinner to increase brightness (add 5% max)
PLAST ADDENSANTE 740, to increase viscosity (add 0,1% 4 hours before the use)
PLAST ADDITIVO 378, to improve printability (add 2% max)
PLAST ADDITIVO 24, to reduce viscosity and improve the printability (add max 1-2% max)
CLEANING
Wash tools with white spirit.
PACKING
7 KG.
NOTE
Before to use the ink in production, we suggest to make some test in order to evaluate if the product satisfies the requirement.
AD-TEX13 LC WHITE
Plastisol ink suitable to print on t-shirt, sweater, etc. Suitable for background.
It could be cured at least at 130 °C.
GENERAL CHARACTERISTICS
- Low fusion
- Highly opaque
- Good printability
- Fast drying with IR lamps
- High washing resistance at 60°C
PREPARATION
Ready to use. Check the viscosity according to the job.
PRINTING
To obtain best results use screens 34-90 threads/cm both for manual printing and automatic.
POLIMERIZATION
Using flash-dryers the printing process will be easier. We recommend to regulate the time of the flash according to the power of the flash cure unit , the distance, printing type and thickness of the surface.
To obtain washing resistance put in the oven at 160°C for 2-3 minutes.
ADDITIVES
PLAST ADDITIVO UP, to obtain puff effect (add 20% max)
PLAST ADDITIVO 86, to reduce viscosity, to increase brightness (add 5% max)
PLAST ADDENSANTE 740, to increase viscosity (add 0,1% 4 hours before the use)
PLAST ADDITIVO 378, to improve printability (add 2% max)
PLAST ADDITIVO 24, to reduce viscosity and improve the printability (add max 1-2% max)
CLEANING
Wash tools with white spirit.
PACKING
7– 25 KG.
NOTE
Before to use the ink in production, we suggest to make some test in order to evaluate if the product satisfies the requirement.
Discharge Inks
TEXPRINT DISCHARGE BASE
Code: AM100609
Water based product for textile discharge printing, suitable for cotton dyed with dischargeable pigments.
GENERAL CHARACTERISTICS
- It contains fillers on the formulation that permits to obtain discharge effect even on facric partially dischargeable.
- Wet on wet printing
PREPARATION
Prepare only the quantity needed for daily use:
- Texprint discharge base grms. 1.000
- Colorante (pigment) grms. 0.050
- Texprint discharge corrodente grms. 0.050
The mixed paste has a stability of 12 hours. CORRODENTE has to be added always at the last. The percentage of CORRODENTE can be increased up to max 10%.
PRINTING
To obtain best results use screens 43 threads/cm both for manual printing and automatic.
POLIMERIZATION
To obtain a perfect corrosion put garments still wet in the oven immediately after printing.
To obtain high washing resistance put in the oven at 150-160°C for 2/3 minutes.
The polimerization develops phormaldeyde, for this reason we suggest to wash the garment before wearing or give this information to final customer.
ADDITIVES
TEXPRINT ADDENSANTE W, Thickening agent (add 0,5-3%)
TEXPRINT RITARDANTE GEL, to slow drying on the screen (add 5%)
TEXPRINT ADDITIVO S, to slow drying on the screen without reducing the viscosity (add 5%)
TEXPRINT NO TACK, To obtain a more opaque and softer touch (add 15-20%).
CLEANING
Wash tools with water.
PACKING
60 KG.
NOTE
Before to use the ink in production, we suggest to make some test in order to evaluate if the product satisfies the requirement.
TEXPRINT DISCHARGE BIANCO
Code: AM100629
Water based product for textile discharge printing, suitable for cotton dyed with dischargeable pigments.
GENERAL CHARACTERISTICS
- Soft hand
- High opacity and brightness
PREPARATION
Prepare only the quantity needed for daily us:
- Texprint discharge bianco grms. 1.000
- Texprint discharge corrodente grms. 0.060
The mixed paste has a stability of 12 hours. CORRODENTE has to be added always at the last. Dose of CORRODENTE can be increased up to max 10%.
PRINTING
To obtain best results use screens 43 threads/cm both for manual printing and automatic .
POLIMERIZATION
To obtain a perfect corrosion put garments in the oven immediately after printing.
To obtain high washing resistance put in the oven at 150-160°C for 2/3 minutes.
The polimerization develops phormaldeyde, for this reason we suggest to wash the garment before wearing or give this information to final customer.
ADDITIVES
TEXPRINT ADDENSANTE W, Thickening agent (add 0,5-3%)
TEXPRINT RITARDANTE GEL, to slow drying on the screen (add 5%)
TEXPRINT ADDITIVO S, to slow drying on the screen without reducing the viscosity (add 5%)
TEXPRINT NO TACK, to obtain a more opaque and softer touch (add 15-20%).
CLEANING
Wash tools with water.
PACKING
60 KG.
NOTE
Before to use the ink in production, we suggest to make some test in order to evaluate if the product satisfies the requirement.
AD COLOUR gives the a/m suggestions as guidelines for the customer and assumes no liability direct or indirect for any improper use.
It is the user’s responsibility to determine the suitability of the product to the intended use according to his working conditions.
Recent Comments